OTSE petit ascenseur élévateur résidentiel bon marché fabriqué en Chine

Spécifications 1, bon prix et bonne qualité
2: économiseur d'espace
3.stable moving

OTSE petit ascenseur élévateur résidentiel bon marché fabriqué en Chine
Exposition
Nous allons assister à la World Elevator & Escalator Expo 2014 du 13 au 16 mai à Guangzhou.
Numéro de stand: 5504 Bienvenue à nous contacter.

Participarámos La fería World Elevator & Escalator Expo 2014 13-16 Mayo en Guangzhou
Nombre d'objets: 5504 Bienvenido a contactar con nuestro
La description:

Load/person	Speed(m/s)	Hoistway size (mm)	Pit depth(mm)	Cabin size (mm)
250kg/3	0.3	1450*1250	≥300	900*1000*2000
250kg/3	0.4	1450*1250	≥300	900*1000*2000

Adventaje:
1.ruido faible
2. le bon prix et la bonne qualité
3.Service bon, bon design et bonne apparence
4. Economie d'énergie
5.Energie environnementale
Forfait: boite en bois
Hangzhou OTSE evelator Co., Ltd. est une entreprise de haute technologie, nous sommes un fabricant d'ascenseur professionnel intégrant la recherche, le développement, la fabrication, l'installation, la maintenance et la réforme ensemble. Notre usine a absorbé et introduit la technologie de fabrication d'ascenseurs les plus avancées et les pièces d'ascenseur importées en provenance d'Allemagne. À l'heure actuelle, nous sommes l'une des bases de fabrication d'ascenseurs à grande échelle dans l'industrie des ascenseurs en Chine. Notre usine bénéficie d'une grande réputation en Asie en raison de la plus haute norme de sécurité, de la qualité durable, de l'apparence élégante, de l'artisanat avancé et de la technologie de nos produits.
À l'heure actuelle, les produits de notre société ont déjà couvert l'ascenseur de passagers, le levage de marchandises, l'ascenseur de tourisme, l'ascenseur de villa, l'ascenseur de service.

Feature	Description	Remark
Full collective operation	The momentary pressing on one or more car buttons shall send the car to the designated landing in the ordering which the landings are reached by the car irrespective of the sequence in which the buttons are pressed. During this operation, the car shall answer calls from the landings which are in the prevailing direction of travel, and each call shall be canceled when answered.	Standard
Molded Circuit Breaker	Protects the elevator control equipment from unusual voltage surges in the building power supply
Fireman Operation	In case of fire , a firemen can use the elevator which is stopped at the specified floor set in advanced.
Absent or Mistaken Epsilon Phase Device	While absent or mistaken epsilon phase, the safe electrical circuit will cut out, and safety gear act. it will make the elevator stop.
Attendant operation	The operating mode of an elevator can be changed from the normal full-automatic operation to the attendant service by an attendant switch, when required.
Door open guarding	In automatic operation, the elevator only stop at the floor registered
Microcomputer self-inspection	Though you restart the system, the microcomputer will scan the I/O point in control system. If any abnormity in control system, the elevator will stop.
Self-adjustment	The control system can self-adjustment position, when actual position data is not compatible with the data in memory.
Automatic speed set	The high, medium and low speed can be simultaneously set in microcomputer base on different distance.
Screen display in microcomputer	The debugging and operation information is displayed in the screen of microcomputer
Engine guard device	While start the elevator, the traction can't work or rope skid in set time. The elevator stop immediately.
Inspection and repair operation	Manual operation in low speed, while the elevator is inspecting or repairing.
Full load bypass	If the car full loads, the elevator will automatically ignore all the hall calls in the direction of service and respond car calls only. The hall calls remain registered and will be served on the next trip (single car),or by another elevator (group).
Flexibly set floor display and stop	Special typeface and the stop floors can be set flexibly
Problem alarm	Any problem is inspected, the microcomputer will transfer the operation to prohibition mode. Only resume the button , the elevator can operation again
Mechanical Lock	The mechanical lock of elevator has a single input point to control.
Contactor	The elevator won't work, if the contactor isn't release in the latest operation.	Standard
Alarm button	Any unusual thing is appeared, press this button for help
Car door safety edge	Extending the full height of the car door, this device causes the doors to return to the fully open position, should the door encounter a person or obstacle while closing

Load weighting device	Detects unusual load conditions and prevent elevator from further movement with the buzzer sounding until the overload is corrected
Terminal limit switches	Prevent the elevator from traveling beyond a terminal landing.
Buffers	Located in the elevator pit area below the car and counterweight, if buffers are engaged.
Over-speed governor	It can ensure the car's running speed in normal range to protect the passenger and goods from danger.
Elevator locked	Switch off the two position key switch which mainly located at base floor, then car will run to appointed floor with door-open status and cancel all registered calls.
Fault information recorded	fault information (fault code, time, floor) and last detailed fault information (fault code, time, floor, current, voltage etc) will be recorded for reference.
Emergency cab lighting	Provides interior cab lighting, should there be a failure in the building's normal power supply
Anti-nuisance operation	In case of substantial difference between the number of calls registered on the car operating panel and actual load in the elevator, the elevator prevents unnecessary operation by canceling all registered calls when it arrives at the nearest floor.
Automatically parking	During off-peak hours, after the elevator cars have been dormant with door closed for a predetermined amount of time, the system disperse each car to a designated location (base floor or main floor), thus allowing more efficient service to future hall calls	Standard
Car light & fan automatically shut off	Elevators can be installed with an energy saving feature that automatically switches off the car internal lighting and ventilation fans when no calls are registered after a predetermined period of time.
Arrival chime	An electronic chime provides an audio signal to inform waiting passengers of the arrival of the elevator car at each floor. The chime can be mounted on the top or bottom of the car, or at each floor if required
Hoistway parameter self-learning	Controller can learn the parameter of hoistway by automatically running. The information comprises total floor, floors height, rise etc.
Voice synthesizer	This system provides riding passengers with audio information about car operation such as direction of travel, landing floor, etc	Option
Remote / residential supervisory system	This system monitors elevator operations and conditions of emergency operations
Group Control  ( series )	The group control system for two or more elevators employs artificial intelligence and fuzzy logic. The big-best refined knowledge and experience harnessed in the field of group control have been incorporated into the microprocessors, allowing car assignments to the most used location, and thereby providing superb elevator efficiency and optimum service.
Remote debugging	Through a network ,debugging some parameter and slight problem.
Fire emergency return	When the elevator is receiving a fire signal, all calls are cancelled and all the elevators will immediately travel to the main landing. Then send a feedback signal to manage center.
Door protective device	It is a multi-beam light ray type door protective device, which surveys the car entrance. When a passenger or an object passes the entrance, the elevator will stop the doors at the point of contact and re-open the car doors immediately

Groupes de Produits : Petit ascenseur à la maison